Description
Shaker Style Wood Baseboard Heater Cover
Finally a wood baseboard cover solution that looks great, installs in minutes, and doesn't require any expensive custom carpentry or hired help.
This Shaker style baseboard cover has a recessed center panel and is defined by its clean lines and simple practicality that is popular in custom cabinetry.
Our quality handcrafted wood baseboard covers easily transform your existing hot water baseboard heaters from old and rusty to elegant and stylish. Installation takes mere minutes using only a standard screwdriver.
Each cover kit uses 3/4" thick, moisture resistant, furniture grade MDF (commonly used in cabinetry and baseboard applications), chosen for its consistent strength and stability. Panels are finished in a White satin finish to seal and prevent warping.
Not feeling the white finish? Let your inner Van Gogh run wild! Our wood baseboard covers can easily be painted with any custom color of your choosing using a roller or spray paint application for a custom look. With a simple light sanding these baseboard covers will be ready to paint any color you desire.
Specifications
Each kit contains one front panel, one top panel, 2 end caps, wall mounting brackets and all screws/fasteners required for assembly and installation--all you need is a standard screwdriver.
- Easily fits over your original baseboard heater - just remove the existing front panel and end caps
- High quality MDF with a satin white finish
- DIY installation, no custom carpentry or hired help
- Available in lengths from 3ft - 6ft
- End Caps are included, and come in 3 different styles depending on your particular needs
- Made in Canada
- Not intended for use over electric baseboard heaters
 |
| Installation Guide |
End Caps
End Caps are included, and come in 4 different styles depending on your particular needs:
Closed End Cap:
The most common End Cap solution and work for most applications where the copper pipe bends down into the floor or the wall behind the heater.
Notched End Cap:
The notched End Cap comes with a pre-notched 1" cutout to accommodate your existing baseboard trim for a perfect fit.
Open End Cap:
Used on the rare occasion when the copper pipe continues on straight without bending--the 2" open space at the side of the End Cap allows the copper pipe to exit.
Joinable End:
No cap. Required when you wish to join 2 or more panels to create a longer run.
Joinable End (corner):
No cap. Required when you wish to join 2 panels at a 90 degree angle to create an L-shape run. NOTE: You will need to purchase the 90 degree Inside Corner piece separately.
PRODUCT DIMENSIONS
| Inside Depth (in.): | 3.5 | Overall Depth (in.): | 4.25* |
| Inside Height (in.): | 9.25 | Overall Height (in.): | 10 |
| Inside Width (in.): | 74 | Overall Width (in.): | 75.5 |
*Does NOT include overhang which adds 1/2" overall
Additional Details
- Profile:
- Shaker
- Overall Length:
- 75.5"
- Overall Depth:
- 4.25"
- Overall Height:
- 10"
- Material:
- Wood
