Description
Linear Resin Vent Cover
Clean lines make this design a top choice for all homes, offices and commercial spaces. It's simple, classic aesthetic makes it an appealing option for any decor scheme.
Covers can be used for cold air intake covers, wall return covers, ceiling and wall heating vents as well as bathroom fan covers. Not for floor use.
Why choose resin?
- Thermally stable (both against high and low temperatures)
- Rigid – Will not warp.
- Paintable -- We provide unfinished covers that have unlimited options for painting and finishes. You (or we) can paint/stain your vent covers to match any decor.
- Nailable – Resin has similar characteristics to wood when it is pin-nailed or screwed.
- Moisture Resistant – Can be used for both interior and exterior* applications.
- Thickness -- 1/4"
- 1" border
- Back side has a 1/4" lip that fits inside of the duct opening
- Back of supply comes with adjustable damper/louver.
*Note: Unfinished vent covers are NOT white--they are a light egg-shell color and are intended to be painted.
*Covers for exterior applications need to be painted with an exterior paint.
Click here for measurement instructions.
Overall Sizes:
RETURN/SUPPLY: grilles will be approximately 2" larger than your duct opening in length and width. (ie. 24x12 will be 26x14 overall)
RETURN AIR FILTER FRAME: grilles will be approximately 3" larger than your duct opening in length and width. (ie. 24x12 will be 27x15 overall)
FAQ:
Q: Do you offer custom sizes?
A: No - as these are a molded product. We offer custom sizes in wood and metal only.
Q: Can these be used for floor? Wall? Ceiling?
A: This cover is for wall or ceiling use only.
Q: Can these be painted?
A: Yes - if you wish to paint them yourself you will select the 'Unfinished' option. Covers for exterior applications need to be painted with an exterior paint.
Q: Do you offer samples?
A: Yes. We have samples available for purchase here (bottom).
Q: Are mounting holes necessary?
A: Mounting holes are typically needed for a wall or ceiling application. If you do not want to use screws/mounting holes to attach your covers you will need to have an alternative method of adhesion.
Q: What is the depth of the frame on the back?
A: Back side has a 1/4" lip that fits inside the duct opening
Q: Do i need a damper?
A: This is totally up to you. If you do open and close the flow of air on your covers often, then you should get a damper. If you don't ever adjust the flow of air on your covers then it is likely not necessary.
Q: How do I adjust the damper?
A: The damper is adjustable using a flat head screwdriver.
Warranty Information
Additional Details
- Material:
- Resin
- Finish:
- Unfinished (paintable)
- Finish:
- White
- Finish:
- Black
- Finish:
- Oil Rubbed Bronze
- Finish:
- Silver
- Finish:
- Brass
- Custom Sizes?:
- No
- Back:
- Flange
